IP camera SV-BA301-E (копия)
- Cylindrical IP camera with PoE support
Description
SV-BА301-Е wired IP camera with a cylindrical design provides a horizontal viewing angle of 100° and is equipped with a 4 MP CMOS matrix for clear video with a resolution of up to 2560 x 1440. The device has a night shooting mode (IR illumination), motion detection system and the function of saving the video archive to a memory card or network storage1.
The camera is equipped with a RJ-45 connector with support for basic network protocols.
1Under development.
Advanced warranty and support packages
Extend basic package with additional paid services
Learn more
Specifications
- Interfaces Ethernet:
- 1x10/100BASE-T (RJ-45), support for PoE
- Built-in microphone
- Built-in dynamic
- ONVIF
- Interfaces memory card:
- 1xMicroSD/SDHC/SDXC up to 256 GB
- IR illumination:
- up to 40 m
- Configuration via web interface
Features and capabilities
For full specifications and manuals see Documents and files section below
Interfaces:
Ethernet
1x10/100BASE-T (RJ-45), support for PoE
Memory card
1xMicroSD/SDHC/SDXC up to 256 GB
Sensor:
Type
1/3” progressive scan CMOS
Effective pixels
4M
Lens and illumination:
Focal distance
2,8 mm
Aperture
F/2.0
Field of view (horizontal)
100°
Field of view (diagonal)
116°
Angle adjustment (tilt)
From 0° to 90°
Angle adjustment (rotate)
From 0° to 360°
IR illumination
Yes
IR range
Up to 40 m
Image:
Image
Color
Maximum resolution
2560x1440
Maximum frame rate
25 fps
Video compression
H.264, H.265
Audio:
Built-in microphone
Yes
Built-in dynamic
Yes
Voice pickup distance
Up to 5 m
Physical specifications:
Power supply
12 V DC, PoE 802.3af (Mode A)¹
¹ Does not support PoE Mode B (power over pairs 4/5 and 7/8)
Form factor
Cylindrical camera
Mount options
Indoor and outdoor
Operating temperature
From -40 to +60 °C
Operating humidity
No more than 90 % (non-condensing)
Ingress Protection
IP66
Free
Basic warranty
Up to 5 years
Extended warranty
Documents and files
Request for design materials
You can request design files (3D models in .step format or device drawings in .dwg format). Our Design department will prepare the needed files for you.